Wheel Modification Tips

1. Don’t try to buy fakes cheap

The modification of the wheel is a more important step in the modification of the car. Whether it is the appearance modification or the improvement of the handling performance, the wheel plays an important role in it. A high-quality wheel, after the rigorous production process and strict inspection, to ensure that its individual parameters are qualified. If economic conditions do not allow it temporarily, please choose to modify the wheels carefully. Although the original “steel wheels” and “cast wheels” may not be beautiful and lightweight, at least the safety is guaranteed.

2. To choose the right wheel correctly

The role of the wheel to improve the appearance is obvious, but when choosing the wheel, every detail must be taken into account. The parameters of the wheel will affect the use of the wheel and the vehicle. If the PCD size is incorrect, it may not be installed normally. The offset is not critical to the installation and use, and may affect future upgrades and modifications.

3. Ensure the wheel is installed correctly

When modifying the wheel, pay attention to the size of the diameter of the center hole. If this size is smaller than the original size, it will naturally not be installed. However, if it is larger than the original size and no comparison measures are taken, there will be a misalignment when the vehicle is driving, causing abnormal noise and shaking of the vehicle, and in severe cases, it will directly affect the safety of the vehicle. If you really like the wheel you like, but it happens that there is no suitable center hole size, if the size is too small, you can ream the hole, and if the size is too large, you can choose the center hole collar provided by some manufacturers for correction.